DYNO EPOXY SL FLORCOTE
DESCRIPTION
A 100% solid self-leveling epoxy enamel for industrial floor coating. It is heavy duty and resist chemical attack and heavy wear in all respect of general industry.
DYNO EPOXY SL PRIMECOTE 450
DESCRIPTION
A two-pack epoxy primer for the priming of the concrete floor. It is a very low viscosity and with good penetrative power. It provides a barrier coat to the floor surfaces and seal off the porousity and good fundation for the subsequent floor coating.
DYNO EPOXY MASTIC
DESCRIPTION
A very fast-cured two-component epoxy mastic pigmented with rust inhibitive pigments, having excellent corrosion resistance and good adhesion to the wet surface, excellent abrasive, water, solvent and chemical resistance.
DYNO EPOXY GLOSS ENAMEL
DESCRIPTION
A two-pack, pigmented epoxy enamel which imparts a high film with excellent resistance to many chemicals, solvent, salt and fresh water. It is formulated with the epoxy as a Base A and catalyzed with a Hardener B. Each of the Package A and B is separately packed in the ratio of 4 to 1 by volume. These should be mixed in correct ratio before using and the resultant mix must be used within 8 hours.
DYNO EPOXY WHITE UNDERCOAT P-4000
DESCRIPTION
A two-pack, pigmented epoxy undercoat. It is excellent resistance to many chemicals, solvent, salt or fresh water. It is formulated with the epoxy as a Base A and catalyzed with a Hardener B. Each of the Package A and B is separately packed in the ratio of 4 to 1 by volume. These should be mixed in correct ratio before using and the resultant mix must be used within 8 hours.
DYNO WASH PRIMER
DESCRIPTION
Based on a vinyl butyral as Base A and an acid catalyst in Component B, Dyno Wash Primer is etch primer for the a metal conditioner the pre-treatment of aluminum or galvanized metal. Dyno Wash Primer will improve the adhesion for the alkyd enamel system on these metal substrate.
DYNO EPOXY ANTI-CORROSIVE PRIMER P-4270
DESCRIPTION
A two-pack epoxy anti-corrosive primer for ferrous metals and is compatible for the Dyno Epoxy and Dynothane systems. It is a heavy duty rust inhibitive primer for the protection of any structural steels or machineries which exposed to the aggressive chemical environment, or subject to heavy duty abrasive service. It is formulated with the epoxy as a Base A and catalyzed with a Hardener B. Each of the Package A and B is separately packed in the ratio of 4 to 1 by volume. These should be mixed in correct ratio before using and the resultant mix must be used within 8 hours.
Dyno Coal Tar Epoxy
INTRODUCTION
Based on the water impermeability of the coal tar pitch and the chemical resistance of the epoxy resin, Dyno Coal Tar Epoxy is an economical protective coating for the structural steel or concrete above or under water. The high build protective film is highly resistant to corrosion, salt or fresh water, mild acid and alkali.
