DYNO SILICONE-ALKYD ENAMEL
DESCRIPTION
Based on a silicone alkyd resin and light-fasted pigments, Dyno Silicone Alkyd Enamel is a high gloss, air-dry enamel of high performance coating and offers many outstanding properties which are not available in the conventional alkyd enamel. It effectively resist the attack of ultraviolet; excellent heat resistant, and maintain the film integrity for longer durability.
DYNO SILICONE HI-HEAT 650C
DESCRIPTION
Formulated on a pure silicone resin and heat resisting pigment, Dyno Silicone Hi-Heat provides the highest heat resistance for metal surface which in constant exposure to the temperature up to 650oc in the dry heat environment.
DYNO SILICONE ALKYD ANTICORROSIVE PRIMER P-6200
DESCRIPTION
Based on an anti-corrosive pigments and silicone modified alkyd resin, Dyno Silicone Alkyd Ani-corrosive Primer provides heat resistance for metal surface which in constant exposure to the temperature up to 140 - 425 o C in the dry heat environment.
DYNOTHANE ENAMEL
DESCRIPTION
A two-component polyurethane enamel which combines the outstanding chemical and physical properties of the epoxy enamel and the outstanding weather resistance of the acrylic coating. It is a heavy duty coating for the long service life even in a aggressive environment. It has excellent gloss retention, chemical resistance, and can be applied over a wide range of substrate, such as ferrous and non-ferrous metals, woods, masonry surfaces.
DYNO EPOXY SL FLORCOTE
DESCRIPTION
A 100% solid self-leveling epoxy enamel for industrial floor coating. It is heavy duty and resist chemical attack and heavy wear in all respect of general industry.
DYNO EPOXY SL PRIMECOTE 450
DESCRIPTION
A two-pack epoxy primer for the priming of the concrete floor. It is a very low viscosity and with good penetrative power. It provides a barrier coat to the floor surfaces and seal off the porousity and good fundation for the subsequent floor coating.
DYNO EPOXY MASTIC
DESCRIPTION
A very fast-cured two-component epoxy mastic pigmented with rust inhibitive pigments, having excellent corrosion resistance and good adhesion to the wet surface, excellent abrasive, water, solvent and chemical resistance.
DYNO EPOXY GLOSS ENAMEL
DESCRIPTION
A two-pack, pigmented epoxy enamel which imparts a high film with excellent resistance to many chemicals, solvent, salt and fresh water. It is formulated with the epoxy as a Base A and catalyzed with a Hardener B. Each of the Package A and B is separately packed in the ratio of 4 to 1 by volume. These should be mixed in correct ratio before using and the resultant mix must be used within 8 hours.
DYNO EPOXY WHITE UNDERCOAT P-4000
DESCRIPTION
A two-pack, pigmented epoxy undercoat. It is excellent resistance to many chemicals, solvent, salt or fresh water. It is formulated with the epoxy as a Base A and catalyzed with a Hardener B. Each of the Package A and B is separately packed in the ratio of 4 to 1 by volume. These should be mixed in correct ratio before using and the resultant mix must be used within 8 hours.
DYNO WASH PRIMER
DESCRIPTION
Based on a vinyl butyral as Base A and an acid catalyst in Component B, Dyno Wash Primer is etch primer for the a metal conditioner the pre-treatment of aluminum or galvanized metal. Dyno Wash Primer will improve the adhesion for the alkyd enamel system on these metal substrate.
